Enter (Num) replacement key QWERTY (US) Black for Logitech MX Keys
Enter (Num)Replacement key for keyboard Logitech MX Keys
Hinge includedThe white plastic clip that holds the key: shipped with it, ready to snap on.Colour: Black
In stock
Not sure?
Not sure this is the right key, or have another question? Ask us on the chat, we'll reply as soon as possible.
Ask a questionVery easy to replace
2 minutes, no need to take the keyboard apart. No skills required.
- Lift the old key by one corner, straight up, with a fingernail or a spudger.
- Clip the supplied hinge onto its hooks.
- Set the new key on top and press the centre until it clicks.
Worried about getting it wrong? We'll send you a video.
Tell us which key you are replacing and we'll send you a video showing, step by step, how to remove it and fit the new one. Free, before or after you order.
Ask for the videoSee how it's done
Video “Logitech MX Keys how to remove keys” by Tin, published on YouTube under the standard YouTube licence: all rights reserved by its author. Keyspares is neither its author nor affiliated with Tin. The player only loads when you click; YouTube may then set cookies (Google privacy policy).
Recommended tools for some keys
Optional but handy: the spudger lifts the key without scratching or bending the mechanism, and the thin blade of the flat screwdriver unhooks the plastic hinge and helps clip it back in.
Specifications
- Category
- Numpad
- Keyboard layout
- QWERTY (US)
- Compatibility
- MX Keys (PC)
- Color
- Black
- Size
- 1U (standard)
Compatible with these Logitech keyboards
- Logitech Signature Slim K950
- Logitech MK950 Signature Slim
- Logitech Signature Slim MK955
- Logitech Signature Slim Solar+ K980
- Logitech ERGO K860
On these keyboards, this genuine MX Keys key takes the place of the official one: same scissor mechanism and mounting, with a legend and finish that may differ slightly.
Where is the keypad Enter key and what does it do?
On a full-size Logitech MX Keys, the keypad Enter key sits at the bottom right of the keypad, two rows tall, below +. It confirms an entry or a calculation, exactly like the main Enter key, placed here so figures can be keyed in with one hand. Num Lock has no effect on it.
About the Enter (Num) replacement key
The Enter (Num) key from the Logitech MX Keys numeric keypad, supplied with its hinge, to get a complete keypad back when a key has broken or vanished. Genuine Logitech and pre-owned, the Enter (Num) key was removed from another keyboard; only the rubber dome is not included.
Compatibility
This Enter (Num) keycap fits the full-size MX Keys (MX Keys, MX Keys S and MX Keys for Mac), the only ones with a numeric keypad: the MX Keys Mini has none, so there is no place for it there. The legend is that of the QWERTY (US) layout.
The Enter (Num) key: position, size and wear
Only the full-size MX Keys has a numeric keypad; its keys take bursts of one-handed presses whenever figures are keyed in. Two rows tall, the Enter (Num) key is often pressed at one end: the off-centre load works one side of the hinge until it splits, and the key then leans or catches.
How to install it
Lift the old Enter (Num) cap by one end, remove the damaged hinge and clip in the one supplied. If a metal wire sits under the key, hook it into its clips first; then press the centre, then each end, until the Enter (Num) key sits flush and springs back evenly.
Enter (Num) key — questions
- Where is the keypad Enter key and what does it do?
- On a full-size Logitech MX Keys, the keypad Enter key sits at the bottom right of the keypad, two rows tall, below +. It confirms an entry or a calculation, exactly like the main Enter key, placed here so figures can be keyed in with one hand. Num Lock has no effect on it.
- Is the Enter (Num) key compatible with my MX Keys keyboard?
- Yes, if it is a full-size MX Keys (MX Keys, MX Keys S and MX Keys for Mac) in the QWERTY (US) layout. The MX Keys Mini has no numeric keypad.
- Is the hinge included with the Enter (Num) key?
- Yes: cap and hinge arrive together. The dome, the small rubber cup that makes the Enter (Num) key spring back, is not part of the order; the one on your keyboard is reused, and a spare dome can be ordered on its own.
- My Enter (Num) key feels loose or uneven after fitting — what should I check?
- Take the Enter (Num) cap off again and check that the hinge is clipped onto all its anchor points; if a metal wire sits under the key, make sure it is engaged in its clips. Then press the centre of the Enter (Num) key before its ends.
Check your keyboard's brand
You are looking at a Logitech key. Keycap and hinge differ between brands: this key will not fit an Apple keyboard.
Apple keys in the catalogue
